Shower Valve Too Far Out
It is possible that the shower faucet sticks out too far due to the valve body being too far forward, as suggested by a user on the DIY Stack Exchange in 2016. To fix this, a longer sleeve can be used to take up the extra space. It is important to ensure that the valve body is correctly installed and the spacer ring is securely fastened.
Do you need a shower valve?
A shower valve is an important plumbing fixture that is used to turn on and off water flow to the shower head. According to Plumbing Appliances (2020), installation of a shower valve requires careful consideration of the depth in the wall to ensure proper operation. To prevent issues such as leaking, it is important to make sure that the valve is not installed too deeply into the wall.
When a shower valve is too deep in the wall, a shower valve extender can be used to add a couple of inches of extra length. According to Drop By My House (2020), this goes between the base and the valve, but in some cases, a new unit may have to be installed. Installing a new shower valve is a complex process that requires knowledge of plumbing and electrical systems.
Why is the valve sticking out?
The bathroom valve is sticking out because it was placed too far forward in the wall cavity. According to Terry Love Plumbing, this is a common issue when installing a shower handle, as it should be placed further back in the wall cavity. Often, this issue can be difficult to fix without removing the surround or accessing the valve from the other side of the wall.
How can I access a recessed shower valve stem?
A person may encounter a shower valve stem that is too far recessed after a DIY project, as was the case for a recent stackexchange.com user. To address this issue, the user opted to purchase a Moen Universal shower handle trim kit, as it was the best option in a metal finish compatible with a push/pull shower valve. Knowledgeable users may consider using an extension nipple to solve this issue in the future.
Why does my shower faucet stick out?
It is possible that the shower faucet sticks out too far due to the valve body being too far forward, as suggested by a user on the DIY Stack Exchange in 2016. To fix this, a longer sleeve can be used to take up the extra space. It is important to ensure that the valve body is correctly installed and the spacer ring is securely fastened.
Can the valve be moved back?
The solution to a shower handle sticking out too far is to move the valve further back in the wall cavity. According to Terry Love Plumbing Advice (2008), this can be done by a qualified plumber or experienced do-it-yourselfer. Improper placement of the valve in the wall cavity can lead to a wide range of plumbing issues.
Can Kohler valve trim solve sticking out shower mixers?
A solution to the issue of shower mixers sticking out too far is suggested in a thread on Plumbing Zone, where it is recommended that Kohler valve trim be installed. The thread, posted in January 2011, explains that the mixers must be set correctly to ensure that the valve trim fits properly. It is important to ensure that the valve trim is installed correctly as this will help to prevent water leakage from the shower.
Can longer screws fix a deep valve?
A solution to the issue of a shower valve installed too deep is to use longer screws to engage the threads in the valve body. According to a 2004 discussion on Fine Homebuilding Forum, this can be done by using two stainless steel screws that are 2.25" long. Installing longer screws into the valve body is a common practice for this type of installation.
What is the ideal valve protrusion?
The accepted maximum for a bathroom valve sticking out is 3/4 of an inch, although 1/4 of an inch is the ideal amount. As suggested by Moen, it is possible for the plumber to move the valve back to meet this standard. According to Terry Love Plumbing (2020), the handle should not stick out more than 1/2 inch from the wall. Valves should be checked periodically to ensure they are not sticking out too far.
What type of shower handle should I use?
The correct type of shower handle to use for a valve that sticks out too far is a wall-mounted single-lever shower handle, which can be adjusted to fit the valve and has an ergonomic design for easy gripping. According to DIY Stack Exchange (2019), most wall-mounted single-lever handles can be adjusted to fit any valve, including those that stick out too far. These handles are typically easier to grip than knobs or dials, making them an ideal choice for those with limited dexterity.
Can the mixing valve body be moved?
The best solution to the issue of a Moen shower trim handle sticking out too far is to open the wall and move the mixing valve body. As suggested by Save Carol Johnson 6, this may be a cost-sharing opportunity for the homeowner and plumber. According to research by the World Plumbing Council, a properly installed mixing valve is essential for safe operation of any plumbing system.
Are Moen valves reliable?
Moen valves are generally not bad valves, but the accompanying handles may be flimsy and stick out too far. This can be seen in the Terry Love Plumbing forum, where users have complained about this issue. In some cases, replacing the handle with a more sturdy option can improve the aesthetic appearance of the valve.
Can I fix a Moen handle?
A Moen handle protruding too far out is a common plumbing issue that can be fixed with the right tools and instructions. According to a recent post on RedditÂ’s Homeowners subreddit (r/homeowners, 2020), the valve assemblies should be secured in order to prevent the handle from flexing, which can lead to further damage and wear over time. To fix this issue, it is recommended to use the appropriate tools and instructions provided by the manufacturer.
Does Moen offer an extension kit?
Yes, Moen offers a 1" Extension Kit to correct this issue. 91110 is the product code for the extension kit, and it provides both volume and temperature control, as well as a center handle to divert water flow to the tub spout or showerhead. Installing a rough-in valve that is too far back from the finished wall is a common mistake made during installation.
